Demo Instruments - Intelli Labs

German
English
Cart
Go to content

Demo Instruments

1. Demo System GC/MSD (Agilent 5973A/6890A)
GC/MSD System (Agilent 5973A/6890A)

Complete refurbished GC/MSD system from Agilent Technologies in perfect working condition. Bundled with an actual PC, with our pre-installed W7IB software to run HPIB-Instruments under Windows 7 and/or Windows 10 operating systems.

6890A Plus GC with fast oven (230V/AC), ALS ready, PTV (Front) and S/SL (Back) Inlet, MSD heating option and preinstalled HP-5MS column.
5973A MSD with Diffusionpump, Edwards Doublestage Foreline Pump and Ion Gauge Vacuum Controller.
Includes six months warranty (except consumables).
7.100,00 € (VAT excl.)
Order Options:
  • on-site Installation incl. Shipment (+1800 €)
  • Extended Warranty for another 6 months (+1500 €)
  • Service Contract for one year (price on request)
2. Demo System GC/MSD (Agilent 5973A/6890A)
GC/MSD System (Agilent 5973A/6890A)

Complete refurbished GC/MSD system from Agilent Technologies in perfect working condition. Bundled with an actual PC, with our pre-installed W7IB software to run HPIB-Instruments under Windows 7 and/or Windows 10 operating systems.

6890A Plus GC with fast oven (230V/AC), S/SL Inlet (Front), ALS-Tower G2613A, MSD heating option and preinstalled HP-5MS column. 5973A MSD with Turbopump and Edwards E2M1.5 Foreline Pump.
Includes six months warranty (except consumables).
8.400,00 € (VAT excl.)
Order Options:
  • on-site Installation incl. Shipment (+1800 €)
  • Extended Warranty for another 6 months (+1500 €)
  • Service Contract for one year (price on request)
CDS Pyroprobe 5200
CDS Pyroprobe® 5200

Pyroprobe® 5200 Pyrolyzer with Thermal Desorption and Reactant Gas Operation (220V). Includes control module, probe handle with one 1/4" coil probe rod, one 1/4" ribbon probe rod, one Tenax cartridge (1/4" O.D.), one Tenax collection trap, low mass programmable interface zone, GC remote start, software (Windows XP or higher), independent pyrolysis and trapping zones and heated transfer line.

Multi-step temperature programming with up to 8 GC runs per sample.
Platinum filament temperatures can be set in 1°C increments up to 1400°C.
Pyrolysis to built-in trap or direct to GC.
Heated sample line through injection port settable in 1°C increments to 350°C.
Includes six months limited warranty (except consumables).
15.100,00 € (VAT excl.)
Order Options:
  • on-site Installation incl. Shipment (+1800 €)
  • Extended Warranty for another 6 months (+1500 €)
  • Service Contract for one year (price on request)
© 2019 Intelli Labs Ltd. - All Rights Reserved
Last update: 31.01.2019
Counter
Intelli Labs
Legals
(F) +49 2842-9732638
(T) +49 2842-9732649
Intelli Labs
Back to content